This is a car that can doodle. First what we did was put the car together. Then plugged it into the computer interface box, after that we typed in the procedures, put it on a large piece of paper and let it rrrrride!! At first we started out getting the car to draw a square. It took about 3 or 4 tries to get it right. We had sound going off in the backround! After we could make the car draw a square we decided to add some moves to the procedures. We made a house out of the square. This took a long time. We just couldn't get it right! After so many tries, we finally got it right. You see the ground the paper was on wasn't that hard or smooth. The car would do something different every time. We had a lot of fun!!!!
*Below is a picture & the programming.
to draw
talkto [motora sounde]
setleft
onfor 10
talkto [motora sounde]
setright
onfor 17
talkto [motora sounde]
setleft
onfor 15
talkto [motora sounde]
setright
onfor 18
talkto [motora sounde]
setleft
onfor 16
talkto [motora sounde]
setright
onfor 18
talkto [motora sounde]
setleft
onfor 16
talkto [motora sounde]
setright
onfor 11
talkto [motora sounde]
setleft
onfor 14
talkto [motora sounde]
setright
onfor 17.5
talkto [motora sounde]
setleft
onfor 15
end